-
Click the image to zoom
-
Click the image to zoom
£99,999.99
We're enamoured with the modern design of the Crosswater MPRO 2 outlet concealed thermostatic bath shower valve. TMV2 approved, this stunning shower valve boasts a striking selection of finishes, ceramic disc technology to prevent unwanted drips, and thermostatic control to maintain your preferred water temperature. For use with an overflow bath filler or bath spout, this shower valve is fully serviceable from the front and comes with a very comforting 15 year manufacturer's guarantee - what more could you need?
Please note that a minimum water pressure of 1 bar is required for this product.
Features:
Please note that a minimum water pressure of 1 bar is required for this product.
Features:
- 2 outlet thermostatic bath and shower valve
- Includes shower handset and hose
- TMV2 approved
- 6 striking finishes: Matt Black, Brushed Brass, Chrome, Brushed Stainless Steel, Brushed Bronze or Slate
- Landscape back plate orientation
- Ceramic disc technology - easy to use and long lasting
- Minimum 1 bar water pressure required
- Thermostatic control keeps the water at the temperature you set
- Fully serviceable from the front
- 15 year manufacturer's guarantee (subject to online registration - please click here)
- Height - 120mm
- Depth - 152mm
- Width - 275mm
Dimensions:
| Product Code | mpro-2o-mwd-sh-vlv-l-h-slt |
|---|
| Type | Concealed Shower Valves |
|---|---|
| Width (mm) | 262 |
| Height (mm) | 221 |
| Depth (mm) | 152 |
| Brand | Crosswater |
| Brand Range | Crosswater MPRO |
| Mounting Type | Wall Mounted |
| Shape | Square |
| Handle Type | Dual Control, Round |
| Minimum Water PressureMore information | 1 |
| Style | Modern |
| Material | Brass |
| Orientation | Landscape |
| GuaranteeMore information | 15 Years |
| Projection (mm) | 152 |
| Number of Outlets | 2 Outlets |
| Temperature Control | Thermostatic |
| Cartridge TypeMore information | Ceramic Disc |
| Global Trade Item Number | 5055833680986 |
| Finish | Slate |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Guarantee
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
