-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
Recommended extras
Hand-picked recommendations to go alongside this product
Refined and smooth, distinctively modern design basin mixer tap, in a choice of 6 eye catching finishes: Polished Chrome, Brushed Stainless Steel, Brushed Brass, Brushed Bronze, Slate or Matt Black, that will refresh the look of any bathroom. This Crosswater MPRO basin mixer provides home owners with a stylish makeover solution to make their properties more elegant. Simple and chic, with a curved design and a single, minimalist lever, this mixer makes a long-lasting impression. Made from high quality materials, with a plated brass monobloc construction, and a water flow regulator that will help you save water with every use, the Crosswater MPRO basin mixer tap is as elegant and modern as it is practical and efficient. Carrying the 15 year warranty from the manufacturer, you can rest assured that you'll admire and enjoy this basin mixer for many more years to come.
Features:
Dimensions:
Features:
- Choice of 6 finish options: Polished Chrome, Brushed Stainless Steel, Brushed Brass, Brushed Bronze, Slate or Matt Black
- Expertly constructed from Brass
- Ceramic disc technology for a drip free tap
- Minimum pressure required: 0.5 bar
- Waste sold separately, please see our recommended extras
- 15 year manufacturer's guarantee (subject to online registration - please click here)
- Shop the full MPRO Range here
Dimensions:
- Height: 165mm
- Spout exit height: 60mm
- Width: 46mm
- Depth: 151mm
- Projection: 120mm
Product Code | PRO110DNF |
---|
Type | Mono Basin Mixers |
---|---|
Width (mm) | 46 |
Height (mm) | 165 |
Depth (mm) | 151 |
Brand | Crosswater |
Brand Range | Crosswater MPRO |
Mounting Type | Deck Mounted |
Shape | Round |
Handle Type | Round, Single Control |
Spout Type | Curved Spout, Fixed Spout |
Minimum Water PressureMore information | 0.5 |
Tap Holes | Mono |
Style | Modern |
Material | Brass |
GuaranteeMore information | 15 Years |
Projection (mm) | 120 |
Cartridge TypeMore information | Ceramic Disc |
Popular Features | WRAS Approved |
Global Trade Item Number | 5055833647750 |
Finish | Brushed Brass |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Guarantee
All of our brand partners and manufacturers offer a warranty as standard. Please note that these guarantees are provided by the manufacturer, and will be subject to individual terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Need more help?
Products from the same range
You may also like
Customers also bought
Related categories
We're here for you
Advice guides
-
How To Replace A Bathroom Tap
Replacing your basin tap can be a lot easier than you think. With this guide we show you how to remove your current basin tap and install a new one. -
Bathroom Taps: What You Need to Know
There is a huge variety of bathroom taps out there. This guide walks you through the questions that you should be asking yourself before choosing new taps for your bathroom. -
The Different Types of Basin Taps Explained
New bathroom basin taps are a great way of enhancing the overall look of your bathroom, en-suite or cloakroom bathroom without the need to spend money on a complete refurbishment. Choosing, however, is not quite as straightforward as it sounds, so we've put together a guide to explain the different types of basin taps and what you should be on the look out for.